Features
- The sealing that can be made of EPDM, NBR and VITON materials can be dismantled and replaced easily on field conditions.
- Inner and outer surfaces of the valve is coated with 300 microns thickness of fusion bonded epoxy.
- Higher thicknesses are availabe upon request.
- Hydraulic braked swing check valves prevent the occurrence of hard brakes due to the effect of the braking system and virtually eliminate the noise, ram impact and damage.
- Ensures 100% sealing with the “T” section ring fixed to the outer diameter of the disc fully facing the seat surface inside the body perimeter made of stainless steel welding.
- Low moments are obtained by decreasing the friction through self lubricating bushings.
- Can bear high stretching stresses on the pipeline through the ductile iron body and disc.
- High impact resistance.
- Reduces the pressure loss through the disc designed in accordance with the direction of flow.
- Pressure loss is at minimum level by double shaft design.
- Countervalve allows installation of both horizontal and vertical pipes on the right and left sides of the mill, counterweight, and lever on both sides of the check valve.
- The clapper opens depending on the flow rate and moves freely depending on the flow.
- The position adjusts to the working conditions thanks to the adjustable weight.
- Lifting lugs and feet ease the balance during transport and installation.
- Hydraulic braked swing check valves prevent the occurrence of hard brakes due to the effect of the braking system and virtually eliminate the noise, ram impact and damage.
- The closing speed can also be adjusted in accordance with the operating conditions in the swing check valves with hydraulic brake.
- With the o-rings on the bearing bushings, disc pin holes are protected against corrosion (Dry shaft).
- Retaining ring is assembled to the disc with imbus bolts, the disc is protected against corrosion by placing o-rings under the bolts.
- Inner and outer surface of the valve is coated with minimum 300 micron thickness FBE coating.
Temperature
- +130 °C (EPDM)
- +100 °C (NBR)
Scope of Application
- Pipelines
- Water Treatment Plants
- Pumping stations
- Tanks
- Seawater applications
- Power plants (cooling water pipelines)
- Industry
Đánh giá
Chưa có đánh giá nào.